Vehicle Temperature and Sunlight Simulation Test Chamber

Model

CZ-AHA-SOR-840 (Customizable)

Test Chamber Size (W×H×D)

W6000 x H7000 x D20000mm = 840m³ (Customizable according to customer's site conditions)

Chamber Door

W5000 x H4000mm

Temperature range

-50℃ to +80℃ (-40℃, -20℃)

Temperature Uniformity/Fluctuation/Deviation

≤2.0℃ / ≤±1.0℃ / ≤±2.0℃

Heating/Cooling time

-40℃ to +80℃, ≤120min, average ≥1.0℃/min (under load, D24 static no heat load)

Humidity Range

20%~95%RH (Temperature range: +10℃~+60℃)

Humidity Uniformity/Fluctuation/Deviation

≤5%RH / ≤±3.0%RH / ≤±2.5%RH;

Airflow Velocity

Vehicle speed simulation tracking fan with a maximum wind speed of 200 km/h; air outlet adjustable.

Solar Simulation (if applicable)

Radiation intensity: 500 to 1200 W/m² (wavelength 280-3000 nm) steplessly adjustable

Fresh Air System

Minimum dew point temperature -40℃, air volume 500~3000m³/h

Exhaust System

Adjustable exhaust pressure differential and adjustable air volume (2000~6000 m³/h)

Dynamometer System(if applicable)

Partnering with third parties

Controller

Industrial-grade 10-inch color resistive touchscreen programmable controller (independently developed controller, industrial host + touchscreen + PLC) equipped with industrial computer and control software.

Protector

Overheat protection for compressor and fan motors, cooling water shortage and undervoltage protection, dry burn protection for heaters and humidifiers, over-temperature protection, leakage protection, flame and smoke detection, video surveillance, hazardous gas monitoring, and emergency escape monitoring.

Operating Environment Requirements

Temperature and humidity 0~35℃≤95%RH

Start up/Running Power Consumption

AC380V 50Hz Three-phase five-wire