Automotive

Vibration Climate Chamber

This equipment can simultaneously simulate the stringent tests of three environmental stresses: temperature, humidity, and vibration, which more realistically reflects the complex challenges that products face during transportation and use than single-environment testing!

product details

Technical Parameters

Model	CZ-UHAK-408(D~G)	CZ-UHAK-608(D～G)	CZ-UHAK-800(D～G)	CZ-UHAK-1000(D~G)
Internal Size (W×H×D) (mm)	600×850×800	800×950×800	1000×1000×800	1000×1000×1000
External Size (W×H×D) (mm)	1100×1710×1370	1300×1810×1370	1500×1860×1370	1500×1860×1570
Temperature Range	-70℃ ~ +100℃(150℃)(D:-40℃ G:-70℃)

Humidity Range	(10%-98%RH / 5%-98%RH for special selection)
Heating/Cooling Rate	3℃ / 5℃ / 10℃ / 15℃ / 20℃/min (Average / Linear)

Temperature/Humidity Deviation	±2℃(No load); +2%RH, -3%RH(Humidity>75%RH), ±5%RH(Humidity≤75%RH)
Temperature/Humidity Fluctuation	≤±0.5℃ (No load); ≤±3%RH (No load)
Temperature/Humidity Accuracy	0.1℃; 0.1%RH
Internal and External Materials	The outer box is SUS 304# stainless steel plate with matte finish or electrostatic painting
Insulation Material	High temperature resistant high-density polyurethane rigid foam insulator material
Cooling System	Air-cooled/single-stage compressors (-20℃), air-and water-cooled/double-stage compressors (-40℃ to -70℃)
Shakers	According to the user's requirements
Controller	Self developed or customized
Compressor	Bock Germany / Bitzer Germany / Tecumseh France
Power Supply	3Φ 380VAC ±10% 50/60Hz

Function Configuration

Protective Device

● Non fuse switch

● Compressor overload protection switch

● High and low pressure protection switch for refrigerant

● Over humidity and over temperature protection switch

● Leakage protection, total power overload, short circuit protection

● Fault warning system

Accessories

● Silicone plug 1 piece

● Observation window

● 100mm test hole

● Lighting fixtures

● Video surveillance system (Purchase)

● APP mobile platform management (Purchase)

Meets the test standards

● GB/T 2423.1-2016 Low temperature test method Bb

● GB/T 2423.2-2008 High temperature test method Ab

● GB/T 2423.3-2016 Test Ca: Steady damp heat test method

● GB/T 2423.4-2008 Test Db: Alternating damp heat method

● GB/T 2424.5-2021 Environmental testing for electrical and electronic products Temperature test chamber performance confirmation

● GB/T 2424.6-2021 Environmental testing for electrical and electronic products Temperature and humidity test chamber performance confirmation

● GB/T 2424.7-2006 Environmental testing for electrical and electronic products Test A and B(with load)temperature test chamber measurement

● GJB 150.3A-2009 High temperature test

● GJB 150.4A-2009 Low temperature test

● GJB 150.9A-2009 Wet heat test

● JESD22-A100E JESD22-A100E

● JESD22-A101D.01 JESD22-A101D.01

Contact Us

As a professional test chamber manufacturer, Guangdong Zhongzhi Testing Instruments Co., Ltd. offers custom products to meet your specific testing needs, including our High and Low Temperature Impact Test Chamber. For more information, please feel free to contact us.

description2

Previous: Walk In High and Low Temperature Humid Hot Low Pressure Test Chamber

Next: Vehicle Corrosion Test Chamber