Semiconductor

PCT High Temperature and High Pressure Accelerated Life Aging Instrument

The performance test of the product during storage, transportation and use in a high temperature, high temperature, high humidity and pressure climate environment is mainly used to test the physical and other related properties of electrical and electronic products, components, metal materials and their materials under simulated high temperature, high temperature, high humidity and pressure climate conditions.

product details

Technical Parameters

Model	PCT-25	PCT-35	PCT-45	PCT-55
Internal size (W×H×D) (mm)	300x250	350x450	450x550	550x650
External size (W×H×D) (mm)	750x1200x800	800x1250x800	900x1380x900	1050x1550x1100
Saturated steam temperature range	Saturated steam temperature range: 100℃~135℃ (143℃ is a special selected type); operating temperature point: 120℃ one atmosphere, 133℃ two atmospheres;
Relative pressure/absolute pressure	Relative pressure: the value displayed by the pressure instrument; Absolute pressure: the value displayed by the pressure instrument plus 1 ambient atmospheric pressure (i.e. the actual value in the test chamber)
Saturated humidity	100% R.H. saturated steam
Use steam pressure (absolute pressure)	0.0Kg/cm²~2.0Kg/cm²(+101.3Kpa); (3Kg/cm² is a special specification)
Cycle mode	Natural convection circulation of water vapor
Safety protection device	Water shortage protection, overpressure protection (with automatic/manual water replenishment function, automatic pressure relief function)
Accessories	14	43	87	155
Equipment capacity	No fuse switch, compressor overload protection switch, refrigerant high and low pressure protection switch, over-humidity and over-temperature protection switch, fuse, fault warning system
Power	AC220V; 1Φ3 wire; 50/60Hz

Structural Characteristics

● The imported high temperature resistant solenoid valve dual-circuit structure is adopted to reduce the failure rate of custom test chambers to the greatest extent;

● Independent steam generation chamber to prevent steam from directly impacting the product to avoid partial damage to the product;

● The door lock labor-saving structure solves the disadvantage of the first-generation product disc handle being difficult to lock;

● Cold air is discharged before the test; the cold air discharge design during the test (air in the test barrel is discharged) improves pressure stability and reproducibility;

● Ultra-long experimental operation time, the long-term experimental machine operation is 1000 hours;

● Water level protection, through the water level sensor detection protection in the test room ;

● Tank pressure-resistant design, the tank body pressure resistance (140℃) is 2.65kg, and it meets the water pressure test of 6kg;

●Two-stage pressure safety protection device, using a two-stage combined controller and a mechanical pressure protection device;

● Safety protection pressure relief button, emergency safety device two-stage automatic pressure relief button, applicable to the safety standards of the Semiconductor Industry;

● Full touch controller, supports USB flash drive to export historical records;

● The temperature controller is an imported brand digital display controller, PT100 sensor, pointer pressure gauge;

● Built-in water tank. The equipment has protection devices such as phase loss, water shortage, pressure, and heating tube empty burning;

Product Description

This equipment is mainly used to test the performance of products during storage, transportation and use under high temperature, high temperature, high humidity and pressure climate conditions. It is mainly used to test the physical and other related properties of electrical and electronic products, components, metal materials and their materials under simulated high temperature, high temperature, high humidity and pressure climate conditions. After the test, it is determined by verification whether the performance of the product can meet the requirements, so as to provide products for design, improvement, verification and factory inspection. The sealing performance test and the accelerated life test of related products.

Saturated Steam Temperature, Saturated Steam Humidity, Pressure Comparison Table

Meets the Test Standards

● GB2423-2-1-89; GB2423-3-2-89;GB2423-3-89 High temperature, high pressure and high humidity aging box execution and standards

● GB/T10586-1989 Humidity test room conditions;

● GB2423.3-93 (1EC68-2-3) Constant humidity test;

● MlL-STD810D method 502.2;

● GJB150.9-8 Temperature and humidity test;

● GB2423.34-86, MlL-STD883C method 1004.2 Temperature, humidity and high pressure combination test;

Contact Us

Zhongzhi Testing as a professional test chamber manufacturer, We provide customized services to meet your specific needs, including our VOC Pretreatment Chamber/Clean Chamber. For more information, please feel free to contact us.

description2

Previous: TH High and Low Temperature Humidity Test Chamber

Next: VOC Pretreatment Chamber/Clean Chamber