Products

Standard Two-Chamber Thermal Shock Test Chamber

Thermal shock test chamber is used to test the degree to which materials or composite structures can withstand continuous high and low temperature environments in an instant, so as to test the chemical changes or physical damage caused by thermal expansion and contraction in the shortest time. Applicable objects include lithium batteries, metals, plastics, rubber, electronics and other materials, which can be used as a basis or reference for product improvement!

description2

product details

Product Specifications:

Model+A2:F17	CZ-H-42(A～C)	CZ-H-80(A～C)	CZ-H-150(A～C)	CZ-H-225(A～C)	CZ-H-408(A～C)
Inner Dimension WxHxD(mm)	400x350x300	500x400x400	600x500x500	600x600x550	700x600x600
Outer Dimension WxHxD(mm)	1100x1930x1450	1200x2060x1550	1300x2390x1670	1300x2570x1700	1400x2630x1750
Temperature range	(150℃～A:-45℃;B:-55℃;C:-65℃)；(High temperature area: +60℃～+150℃; low temperature area: -10℃～-65℃)
Heating time (heat storage area)	RT～200℃ takes about 35min
Cooling time (cold storage area)	RT～-70℃ takes about 55min
Temperature recovery time/conversion time	≤5min/≤10sec
Temperature control accuracy/distribution accuracy	±0.5℃/±2.5%℃

Structural Characteristics:

●The two-chamber equipment is divided into two parts: high temperature zone and low temperature zone. The test product is placed in the basket. When impacting, the basket moves the test product into the high temperature zone or low temperature zone for impact. The test product is dynamic.

●The touch-screen graphic control operation interface is adopted, which is easy to operate, suitable for application scenarios of various testing chambers.

●The impact method uses the air duct switching method to introduce the temperature into the test area for hot and cold impact test.

●When high temperature impact or low temperature impact, the maximum time can reach 999H, and the maximum cycle can reach 9999 times.This design is widely used in our thermal test chamber.

●The system can be used for automatic cycle engine or manual selective impact.

●The cooling adopts a binary refrigeration system, the cooling effect is fast, and the cooling method is water cooling.

*It is not possible to test the impact of normal temperature

Wider temperature shock range

Refrigeration system description

● Use imported parts from internationally renowned brands.

● Use R404A and R23 refrigerants with zero ozone depletion coefficient.

● The condenser is easy to clean to ensure long-term and reliable operation of the unit.

● Intelligent control of the refrigeration system, suitable for a wide range of loads, and lower operating power consumption.

● Use imported compressors: Copeland, Blog or Bitzer, with lower and more stable operating noise and stronger performance.

● All pipelines are protected by nitrogen before welding to ensure that the inside of the copper tube is not oxidized, and the surface of the weld is coated with varnish for protection. It is one of the manufacturers in the industry that meets this standard.

● Modular production of refrigeration units is divided into three modules: sub-assembly, sub-assembly and general assembly; establish a pipe bending manual to ensure the uniformity of the system; standardize modules for easy installation, commissioning and maintenance.

Lmplement and Meet Standards and Test Methods

●GJB 150.5A-2009 Temperature shock test

●GB/T 2424.13-2002 Temperature shock test

●GJB 360B-2009 Temperature shock test

●GB/T 2423.2-2008 High temperature test method

●GB/T 2423.1-2008/IEC 6008-2-1-2007 Low temperature test method

●GB/T 10589-2008 Low temperature test chamber technical conditions

●GB/T 11158-2008 High temperature test chamber technical conditions and specifications

Selection reference

Contact Us

As a professional test chamber manufacturer, Guangdong Zhongzhi Testing Instruments Co., Ltd. offers custom products to meet your specific testing needs, including our Large Three-Slot Thermal Shock Test Chamber. For more information, please feel free to contact us.

description2

Previous: Small Rapid Temperature Change Test Chamber 80L/100L/150L/225L/408L/608L

Next: Large Three-Slot Thermal Shock Test Chamber